B BAADB

Performance Rating

  • Summary - Rating: BSuitable for industrial process cooling, AC and other applications where a toxic classification is not an issue. Good thermal and pumping characteristics.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and reduced energy demands.

  • Antifreeze - Rating: AProvides protection down to -50°C and lower concentration (% volume) is required to achieve the same freeze-point protection, when compared with NTP, USP, ECO2 and ECO3.

  • Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: DClassified as Harmful but usually considered as Toxic. Suitable for industrial cooling systems where toxicity is not an issue.

Physical Properties

  • Density:1.09 - 1.14g/cm³ depending on inhibitors

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma

  • Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers.

Mixing Guide

When measuring the percentage concentration of Coolflow IGE in solution we recommend the use of a recently calibrated refractometer.

Frost Protection °C

v/v of Coolflow IGE %

Refractive Index

-10

20.0

1.35190

-15

27.0

1.35860

-20

32.0

1.36350

-25

37.0

1.36830

-30

41.0

1.37210

-35

45.0

1.37600