B BBAAC

Performance Rating

  • Summary - Rating: BSuitable for systems where low environmental impact and ecological sustainability is preferred. Slightly more efficient than ECO2 but more expensive per litre.

  • Efficiency - Rating: CLow Thermal Conductivity and high Viscosity at sub-zero temperatures, results in reduced heat transfer efficiency and increased energy demands.

  • Antifreeze - Rating: BProvides protection down to -50°C but more volume is required to achieve the same freeze-point protection compared with DTX, IGE and LVF.

  • Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for food & beverage processing systems and where low-toxicity is stipulated. LD50 Oral Rat >20,000mg/kg body weight.

Physical Properties

  • Density:1.02 - 1.26 g/cm³

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:a clear, slightly viscous liquid. It is slightly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers.

Mixing Guide

When measuring the percentage concentration of Coolflow ECO3 in solution we recommend the use of a recently calibrated refractometer.

Frost Protection °C

v/v of Coolflow ECO3 %

Refractive Index

-10

25.0

1.36300

-15

32.0

1.37200

-20

38.0

1.37800

-25

43.0

1.38400

-30

48.0

1.38900

-35

52.0

1.39400