B BAADB

Performance Rating

  • Summary - Rating: BSuitable for geothermal, GSHP and air-source heat recovery systems and other heating applications where a toxic classification is not an issue. High efficiency and more cost effective than FPG and FXC2

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -58°F and less volume is required to achieve the same freeze-point protection, when compared with FPG and FXC2.

  • Corrosion Control - Rating: ALong-Life formulation with synergistic corrosion inhibitors to exceed BS6580 and ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: DClassified as Harmful but usually considered as Toxic. Suitable for industrial cooling systems where toxicity is not an issue.

Physical Properties

  • Density:1.108 - 1.118g/cm³ depending on inhibitors

  • pH:8.0 - 9.0 depending on inhibitors

  • Boiling Point:>212°F

  • Characteristics:a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5 Gallon Pails, 55 Gallon Drums & 275 Gallon Totes.

Mixing Guide

When measuring the percentage concentration of Thermox ITF in solution we recommend the use of a recently calibrated refractometer.

Frost Protection °F

v/v of Thermox ITF %

Refractive Index

10

25.0

1.35867

0

32.0

1.36564

-10

37.1

1.37065

-20

40.9

1.37434

-30

44.3

1.37763

-40

47.8

1.38098