A AAAAB

Performance Rating

  • Summary - Rating: ASuitable for biomass boiler heating systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -58°F and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.

Physical Properties

  • Density:1.008 - 1.15 g/cm³ depending on inhibitors

  • pH:8.0 - 9.0 depending on inhibitors

  • Boiling Point:>212°F

  • Characteristics:Clear, straw coloured, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5 Gallon Pails, 55 Gallon Drums & 275 Gallon Totes.

Mixing Guide

When measuring the percentage concentration of Biotherm DTX in solution we recommend the use of a recently calibrated refractometer.

Frost Protection °F

v/v of Biotherm DTX %

Refractive Index

10

25.4

1.35922

0

32.0

1.36611

-10

37.1

1.37141

-20

41.4

1.37585

-30

45.4

1.37995

-35

47.3

1.38188