A AAAAB

Performance Rating

  • Summary - Rating: ASuitable for biomass boiler heating systems and other heating applications where a non-toxic classification is preferred. High efficiency and more cost effective than MPG and bio-based coolants.

  • Efficiency - Rating: BHigh thermal conductivity and low viscosity at sub-zero temperatures, results in increased heat transfer efficiency and increased heat recovery.

  • Antifreeze - Rating: AProvides protection down to -50°C and less volume is required to achieve the same freeze-point protection, when compared with MPG based fluids.

  • Corrosion Control - Rating: ALong-Life high temperature rated formulation with synergistic corrosion inhibitors to exceed ASTM D1384 standards. Also contains broad-spectrum biological inhibitors and polyacrylates to prevent scale precipitation.

  • Toxicity - Rating: AClassified as Non-Toxic and Food-Safe. Suitable for systems where low-toxicity is stipulated or preferred.

Physical Properties

  • Density:1.11 g/cm³

  • pH:7.5 - 9.0 depending on inhibitors

  • Boiling Point:>100°C

  • Characteristics:Clear, straw coloured, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.

  • Available in: 5, 10, 20, 25, 205 & 1000 litre containers and bulk tankers.

Mixing Guide

When measuring the percentage concentration of Biotherm DTX in solution we recommend the use of a recently calibrated refractometer.

Frost Protection °C

v/v of Biotherm DTX %

Refractive Index

-10

22.0

1.35600

-15

28.0

1.36200

-20

33.0

1.36700

-25

38.0

1.37200

-30

42.0

1.37600

-35

46.0

1.38000